Sky+ fix and remote codes

IF YOU ARE TIRED OF PAYING YOUR DIGITAL TV PROVIDER CHECK THIS SITE OUT

Get over 3000 Stations FREE

If you decide to keep on paying them up to £48 every month here is the info to at least save the call out fee

WARNING - following this advice is totally at your discretion and anything which happens to your digibox as a result is your responsibility, not mine. You will lose all recorded programmes from your Sky+ Planner.

Sky tech support can talk you through performing a system restore over the phone. To do this yourself, press 'services' on your Sky plus remote, then select option 4. Next press 0, 1, select - you should now see the engineer's menu. Choose option 8, 'Full System Reset'. The box will now take a few minutes to reset itself.

Try pausing or recording again, and if the problem persists disconnect the digibox from the mains power. Press and hold the 'left' and 'right' navigation buttons on the front of the digibox whilst you reconnect the mains power. Continue holding the buttons in for about 20 seconds, and when the ring of light on the front comes on, press the 'select' button on the front of the digibox (between the left and right buttons you were holding). The Sky+ recording logo lights will spin backwards and, according to the Sky engineer, this will "clear the hard drive".

Once this is done, disconnect the digibox from the mains power again and this time press and hold the 'back up' button whilst you reconnect the mains power. Continue holding it for about 15 seconds until 3 lights on the front of the box come on and you get a full-screen message saying "Updating system software. Do not disconnect mains supply or satellite dish."

Leave the digibox doing its thing for about 10 minutes and it should be fixed!
Try pausing and recording things again... hopefully you've just saved yourself £65.

If you've not been so lucky, you'll have to get Sky to fix it for you. Some people report that if you ask to cancel your subscription Sky sometimes offer a free callout to fix the problem - you're more valuable to them as a paying customer than the cost of an engineer callout.


Programming the SKY remote to operate your TV Receiver

Before the remote control can operate the TV it must be programmed, a 3 or 4 digit code can be entered to select the correct IR command set, held in the remote control's memory. The database stored in the remote control, holds codes for around 90% of TV manufacturers, and some manufacturer's share the same code.


The easiest way to set up the remote is to input the 3 digit code for the TV receiver if it is available.

3 digit code programming.

Press "TV", then "select" + "red" (hold for 2 seconds) then the three digit remote code, then press the "power" button to see if it operates your TV, if not repeat the functions and trial of codes until it does, once you have found the correct number write it down now test the other functions of the TV it may be that you still haven't got the right code. As easy as that

You can have  the list sent to you via email (the email address that paypal holds for you)  in adobe acrobat format for you to keep.

As soon as your paypal payment is received Only £1.40

Your computer probably already has adobe reader but if not you can download it for free from here

 

adobe acrobat reader free

SkyHD Remote
The HD remote by default works ONLY the SKY-HD box.
It can however control the HD box and the SKY+ box because the Sky-HD box recognises both sets of codes

To change it to a sky plus remote
1) Press the TV button.
2) Press and hold SELECT and i together until the LED flashes twice.
3) Press the number button 1 and then press SELECT.

To change it to a sky HD remote
1) Press the TV button.
2) Press and hold SELECT and i together until the LED flashes twice.
3) Press the number button 2 and then press SELECT


Remote Codes. (Sky HD are further down)






--------------------------------------------------------------------------------

SkyHD Remote Codes

ACER AT3201W 0198
LCD26 0198
BLUESKY LCD32 0206
BUSH 022HD 1584
DENON AVC-A1D 1388
AVR-1907 1388
AVR-2105 1388
AVR-2803 1388
DIGIHOME LCD26701HD 065
DIGILOGIC D20 LCD1 0536
HISENSE PDH4217EU 142
HUMAX LEU-20A 1323
LEXSOR various models 1196 , 1224
LG various models 0037, 0056, 0060, 0065, 0080, 0081, 0125, 0137, 0178, 0191, 0204 , 0244, 0245, 0275, 0318, 0389, 0391, 0398, 0405, 0459, 0502, 0742, , 1146, 1367
LG/GOLDSTAR 32LX2R 0056
32LZ50/55 0206
37LB1D 0056
37LC2D 206, 0206
42LC2DB 0206
ALL 32, 37, 42 L 0206
37LE2R 206
42PC1D 206
42PC1DV 0056
42PX4D 0056
42PX5D 1206,0056
LG50PY2R 0206
PC42D plasma 206
RE44SZ21RD 0206
RZ15LA70 206
LOGIK LCXW32HD1 111
MIRAI DTL-532W100 1533
SAGEM HD-D56B 858
SAMSUNG LE40 123
SWISSTEC 11 662
VIEWPIA LC-32IE22 0904
YAMAHA DSP AX757SE 0204